| DistroWatch Weekly
|DistroWatch Weekly, Issue 797, 14 January 2019
Welcome to this year's 2nd issue of DistroWatch Weekly!
Two hurdles Linux faces when trying to gain more mainstream appeal on desktop systems are support for more gaming titles and support from hardware retailers. This week we are happy to share good news on both of these fronts. In our News section we first look at the Debian team working on improving Secure Boot support on their distribution. Then we talk about Ubuntu and Ubuntu MATE being shipped on new all-in-one (AIO) devices and discuss increasing support for Linux in Valve's Steam store. In our Feature Story this week we take an early look at two projects on our waiting list Reborn OS and TinyPaw-Linux and share what makes these distributions interesting. Plus we offer tips on how to deal with an unresponsive desktop environment. In our Opinion Poll we ask what tools our readers use to keep their systems running smoothly when rogue processes try to gobble up more resources than they should. As usual, we share the distribution releases of the past week and provide a list of the torrents we are seeding. We wish you all a fantastic week and happy reading!
Listen to the Podcast edition of this week's DistroWatch Weekly in OGG (14MB) and MP3 (10MB) formats.
|Feature Story (by Jesse Smith)
Reborn OS 2018.11.28
Reborn OS is a distribution from the Antergos and Arch Linux family of distributions. Like Antergos, Reborn uses the Cnchi system installer and provides a wide range of desktop environments and extra features we can enable at install time. Reborn's website mentions the project offers support for running Android applications through the Anbox compatibility software, works with Flatpaks, and can run the Mycroft personal desktop assistant.
I had previously tried Reborn OS back in October of 2018 and gave up trying to install the distribution because Cnchi kept running into problems downloading packages, telling me it had run into "error: 0". Since failure to download packages during the installation rendered it impossible to set up Reborn, I had to abandon the project.
Shortly after my truncated review appeared, one of the Reborn developers got in touch and reported that the problem with Cnchi had been fixed and invited me to try the distribution again. I gave the project a few months (and updated releases) to mature and then decided to give Reborn another test drive.
The Reborn ISO file is a 1.6GB download. Booting from the media brings up the Budgie desktop environment and shows us a welcome window. The welcome window appears to be borrowed from Antergos and displays buttons which will provide us with information. Some buttons link to the project's on-line source code repository, others offer to show us available software, another gives us a quick overview of the operating system.
Using the welcome window I ran into my first problem with Reborn. Clicking some of the buttons caused the operating system to lock up. For example, browsing the software list caused the system to freeze, necessitating a reboot. When I clicked on the source repository link, the Firefox browser opened, displayed the page and then the system locked up, again forcing a hard reset of the computer.
Reborn OS 2018.11.28 -- Reborn's welcome screen
(full image size:668kB, resolution: 1366x768 pixels)
At this point I decided to stop exploring the live desktop and jumped into the Cnchi installer. The installer runs in a graphical window and feels similar in most respects to Ubuntu's Ubiquity installer or the Calamares installer. We are asked to select our preferred language from a list, select our country and select our time zone from a map. We are asked to confirm our keyboard's layout and then shown a list of available desktops. We can only choose one desktop to install, but the list of options is long and includes Budgie, Cinnamon, Enlightenment, GNOME, i3, KDE Plasma, LXQt, MATE, Openbox, Pantheon and Xfce. There is also one called "Windows interface", but its description does not say what technology is used to present the Windows-like view.
The installer next asks which features we would like to enable. Options include accessibility packages, system maintenance, AUR support, Bluetooth, Chromium, Firefox, LibreOffice, Mycroft, printing support, WINE, VLC and Spotify. The list goes on. I kept my selection short, sticking to some common desktop applications like LibreOffice, a web browser and Mycroft. Cnchi then asks if we want to let it sort its list of package mirrors or manually select mirrors. I took the recommended automated sort.
Partitioning comes next with the option of using guided or manual partitioning. I went with the manual option, and then had to wait as the installer told me it needed to finish sorting its mirror list before I could partition the drive. Once the mirrors are sorted, partitioning is straight forward and pleasantly streamlined. Finally, we are asked to provide a username and password for an account and the installer goes to work downloading and installing packages, over 700 packages in my case.
After waiting for about half an hour, Cnchi finally reported "Can't install necessary packages" and displayed the infamous error 0. Unfortunately there is no way to recover. The installer closes without telling us which package caused the problem, or giving us a chance to proceed anyway, or giving us the option to try another mirror. The installer closes and we are left to try again from step one. The project's documentation says we can try to work around the issue by manually editing the package list to remove the offending package, but that is difficult given there were over 700 packages to go through and Cnchi does not give us a clue as to which one caused the problem.
I ended up trying Reborn OS in a VirtualBox machine and on my laptop. In both cases I quickly ran into a dead end with the distribution. This was frustrating as it means that, despite the assurances of the developers that the system should now be reliable, the installer issue has not been fixed. If anything, it seems new stability issues have crept in since the last time I used the distribution.
I have been told the Reborn team is working on their own installer to replace Cnchi. Hopefully the new installer (which has not appeared yet at the time of writing) will make setting up the operating system more straight forward.
* * * * *
Next on my list of projects to try was one I had not downloaded before: TinyPaw-Linux. The distribution's website describes the project as "an extremely lightweight and portable WiFi pen-testing distro. One that wasn't bloated with non-essential tools and features and that could actually boot, run and perform from CD or USB."
TinyPaw is based on Tiny Core Linux. While the project has a tiny parent and began as a relatively small distro, it has grown quickly in size. Version 1.0 was published in December 2017 and was 294MB in size. Version 1.3 was launched in October 2018 and was a 740MB download. I suspect the extra weight was introduced through new packages and WiFi testing tools.
The latest version appears to be based on Tiny Core Linux 9.0. Booting from the project's live media loads the distribution into RAM, making it highly responsive. At least it does if the distribution completes the boot process. I began by running TinyPaw on a laptop and, though the system started its boot sequence and was able to load modules into memory, it then locked up, unable to get to its graphical interface and unresponsive to keyboard input.
I switched to trying TinyPaw in a VirtualBox environment and had better luck. The distribution booted into a minimal graphical environment which carries a strong red on black theme. A panel at the bottom of the screen holds quick-launch buttons for various WiFi tools, network scanners, a settings panel and a lightweight web browser called Fifth. There are also launchers for a virtual terminal, a text editor and the PCManFM file manager.
TinyPaw-Linux 1.3 -- The Fifth web browser and TinyPaw's settings panel
(full image size: 155kB, resolution: 1024x768 pixels)
Right-clicking on the desktop brings up an application menu which helpfully organizes tools into categories. This makes it easier to quickly find networking tools as opposed to password crackers or scanners.
I played around with a handful of the included utilities and found most of them worked. This allowed me to scan the network, try to brute force passwords and collect network traffic. Some tools did not work though. One would open a blank window that closed after a few seconds, one of the password crackers reported it was missing dependencies and refused to run. For the most part, TinyPaw gave me functioning tools, but occasionally one would fail or simply not run.
A bigger issue I ran into is that TinyPaw includes no manual pages and no local documentation for the tools it features. This means if we don't know what an application does, or we know what it does but want to learn how to use a command line parameter, we need to go on-line and search for the answer. This introduced a series of speed bumps into my trial since anytime I wanted to use a new tool I had to open a web browser, search for the tool, go to its website, hope the utility had on-line documentation and read that. This is quite a bit slower than just opening a local manual page.
A positive side-effect of having such a trim distribution (one without documentation and a full featured desktop environment) is the whole distribution only requires about 300MB of RAM. And it appears as though the distribution runs entirely from within memory, making programs open very quickly.
I had mixed feelings using TinyPaw-Linux. On the one hand, it does ship with some useful penetration testing tools and the platform is small and fast. However, the lack of local documentation and my inability to get the distribution to boot on physical hardware made it impractical for most scenarios in which I would want to use such a tool.
|Miscellaneous News (by Jesse Smith)
Debian tests Secure Boot, Ubuntu shipping on Entroware AIO, most highly popular Steam games run on Linux
The Debian team is experimenting with booting their distribution on machines with Secure Boot enabled. Secure Boot strives to prevent the user from booting into compromised environments by checking for signed low-level components. This poses some challenges for Linux users who may have unsigned or custom kernels. People interested in helping Debian work out the bugs in their Secure Boot solution can follow the instructions in the project's wiki.
* * * * *
Entroware is a computer manufacturer in the United Kingdom which sells personal computers and servers with Linux pre-installed. The company has unveiled a new all-in-one (AIO) system called Ares PC that ships with the customer's choice of Ubuntu or Ubuntu MATE. Forbes comments: "The baseline Ares starts at £739 (about 824 Euros) and includes a 24-inch 1080p matte display with built-in speakers, Intel Core-i3 8100 at 3.6GHz, 8GB of RAM clocked at 2400MHz, a 120GB SSD loaded with your choice of Ubuntu or Ubuntu MATE and a 3 year warranty. From there you can tinker with several upgrade options, stretching all the way to the fully-loaded £2689 Ares. Considering the size, it can pack a pretty considerable punch with a 6-core, 4.6GHz Intel Core-i7 8700, 32GB of RAM, and a 2TB NVMe SSD plus an additional 4TB SSD drive. You can also bundle an additional monitor, but it doesn't look like Entroware offers a 4K display option." Further details can be found on the Entroware website.
* * * * *
Linux gamers should be pleased to learn that more and more popular gaming titles are becoming available. The GamingOnLinux website took a look at the most popular titles on Steam and discovered over half of the top 250 offer support for Linux. "Overall, out of the 250 most highly rated titles on Steam as reviewed by users, 132 of them have official Linux support. Compared with Mac which has 156, we're not far off there at all. Let's just remember how small the Linux gaming platform is compared to Windows, over 50% there really is impressive."
* * * * *
These and other news stories can be found on our Headlines page.
|Questions and Answers (by Jesse Smith)
Dealing with an unresponsive desktop
Purging-pop-ups asks: Earlier this year I switched to using Linux, specifically Ubuntu for my computing needs. I am running a background job that requires a lot of CPU, like 100% all the time, and it is making my desktop virtually unusable. Input is slow and I keep seeing pop-ups telling me "This application is not responding - close or wait?" Why does having just one big background process bring Linux to its knees and what can I do to fix this?
DistroWatch answers: Welcome to the Linux community, I'm glad you could join us. There are a number of ideas and issues to explore in this situation so first let's take a look at the surface of the problem and then we will explore some possible underlying causes and solutions.
It sounds like what is happening is your one CPU-intensive process is using all the available resources and it is slowing down everything else, including the desktop environment. When the desktop is starved for resources, applications are not processing input quickly enough to appear "alive". When this happens, the system thinks the program might have crashed and offers to get rid of it. In this case, the applications are not actually crashing, they are just too resource hungry to respond.
Part of the issue here is that Linux tends to favour overall work performance over responsiveness. In other words, Linux will try to accomplish as many things as possible in a given amount of time, rather than making dealing with new input and generating a response its priority. This is ideal for servers and number crunching workstations, but not so great for people using the desktop under heavy load. There are ways to change the way Linux schedules tasks to try to get a more responsive user interface, but it is a technical path to walk and tends to involve re-compiling the kernel, and I think there are probably easier ways to address this situation.
Without the specifications of the computer and information on the processes (and constraints) the system is running under, the best course of action is hard to predict. However, I do have a handful of suggestions for situations like this that will hopefully help.
First, you mentioned the system is running Ubuntu, which suggests either the GNOME Shell or Unity desktop is being used. Both of these desktops use 3-D effects which require support from the video card to draw smoothly. Having a video driver that does not perform well puts more work on the CPU to make up the difference and can bring even modern machines to their knees. This typically happens if your machine is running an AMD or NVIDIA card. Almost all the reports I encounter from people saying Ubuntu runs too slowly or their desktop is not responsive can be traced back to a driver issue. Run the Software & Updates application and click on the Additional Drivers tab. This will show alternative drivers which may work better with your video card.
Second, it sounds like this background task is not being polite and gobbling up all the CPU resources it can find. This is going to slow down any system and is not ideal for a desktop machine. Ideally it would be nice to run such a heavy process on its own, dedicated machine, but if that is not possible, we can force the process to act in a more polite manner.
There are tools, called nice, renice and ionice, which will allow a program to run at full speed, but force it to stay out of the way when another program wants to work. This is done by lowering the heavy process's priority. When nothing else is happening on the system, the process can work as hard as it wants, but its reduced priority means other programs (like desktop applications) can interrupt its work.
We have talked about how to adjust the priority of programs previously in an earlier Tips and Tricks article.
A third possibility is the big background process is not only consuming a lot of CPU, it is also consuming memory. When too much memory is used up, the operating system dumps some memory out to swap space, which then needs to be read back when a program wants to use it. You can run the free command to check memory consumption.
If the computer's memory is full and it is starting to use swap space to make room for the heavy process, then there are only so many things you can do. You can run fewer applications and services, or add more RAM to the system.
Finally, so far as I know, there is no way to disable the pop-up which says a task has stopped responding. At least not without editing and re-compiling the window manager. However, you could try switching to a lighter desktop. Assuming you are running either Unity or GNOME on Ubuntu, these are relatively heavy desktops. Since you are running a CPU-heavy process, I think it makes sense to trim as much of the software as possible on this system. Installing a lighter desktop, such as Xfce or LXDE, will free up more CPU and memory for the heavier program.
* * * * *
Additional answers can be found in our Questions and Answers archive.
|Released Last Week
Funtoo Linux 1.3
Daniel Robbins has announced the release of Funtoo Linux 1.3. Funtoo, a variant of Gentoo Linux, is an distribution that builds packages automatically from the source code. It was launched in 2009, shortly after Robbins left Gentoo Linux, a project he had founded in 2000. Version 1.3 brings a deprecation of "multilib" support, among other changes: "The ability for 64-bit versions of Funtoo Linux to run legacy 32-bit applications has been deprecated, so that Funtoo Linux for 64-bit CPUs is now 64-bit only, what we used to offer as a separate "pure64" build. This was done because 32-bit support was originally created as a stop-gap measure 15 years ago to allow for a seamless transition to 64-bit computing, and we believe the time has come to shed this ongoing maintenance burden and focus efforts that have historically been spent on 32-bit compatibility in other areas." Read the release announcement and release notes for more information. The Funtoo project does not provide bootable live or installation ISO images; users are instead directed towards the Gentoo-based SystemRescueCd to initiate any new installation. Optimised builds (or "stages") are available for various AMD and Intel processors, as well as the ARM and ARM64 architectures and Raspberry Pi and ODROID single-board computers - visit the project's "Subarches" page for a complete list.
Qubes OS 4.0.1
Marek Marczykowski-Górecki has announced the release of Qubes OS 4.0.1, an updated version of the project's security-focused Linux distribution which allows users to "compartmentalise" computing tasks into isolated compartments called qubes. This new release is mostly a bug-fix and security update and is recommended for all new Qubes installations: "We are pleased to announce the release of Qubes 4.0.1. This is the first stable point release of Qubes 4.0. It includes many updates over the initial 4.0 release, in particular: all 4.0 dom0 updates to date, including a lot of bug fixes and improvements for GUI tools; Fedora 29 TemplateVM; Debian 9 TemplateVM; Whonix 14 Gateway and Workstation TemplateVMs; Linux kernel 4.14. If you're currently using an up-to-date Qubes 4.0 installation (including updated Fedora 29, Debian 9, and Whonix 14 templates), then your system is already equivalent to a Qubes 4.0.1 installation. No action is needed. Similarly, if you're currently using a Qubes 4.0.1 release candidate and you've followed the standard procedure for keeping it up-to-date, then your system is equivalent to a 4.0.1 stable installation." Read the rest of the release announcement for additional information.
Clonezilla Live 2.6.0-37
Steven Shiau has announced the release of Clonezilla Live 2.6.0-37. Clonezilla Live provides tools for backing up, restoring and copying disk images and disk partitions either locally or across the network. The project's latest version includes several updates and fixes. "The underlying GNU/Linux operating system was upgraded. This release is based on the Debian 'Sid' repository as of 2019-01-08). Linux kernel has been updated to 4.19.13; Partclone to 0.3.12; ldmtool and haveged packages have been added; cURL has been added; NetworkManager has been added so that users can use 'nmtui' to configure network if necessary, especially for WiFi; making unknown fs as 'dd' and the image name for partition like sda3.dd-img.aa is now legacy - it has been replaced by sda3.dd-ptcl-img.lzma.aa; rewrite the same mechanism in ocs-onthefly; in addition to massive-deployment mode, the interactive-client mode was added so that lite server can provide the ability to enter interactive mode of Clonezilla Live in client; let live-build 20180618 handle uEFI boot, so ocs-put-signed-grub2-efi-bldr and ocs-gen-grub2-efi-bldr are deprecated." Further details can be found in the release announcement.
* * * * *
Development, unannounced and minor bug-fix releases
The table below provides a list of torrents DistroWatch is currently seeding. If you do not have a bittorrent client capable of handling the linked files, we suggest installing either the Transmission or KTorrent bittorrent clients.
Archives of our previously seeded torrents may be found in our Torrent Archive. We also maintain a Torrents RSS feed for people who wish to have open source torrents delivered to them. To share your own open source torrents of Linux and BSD projects, please visit our Upload Torrents page.
Torrent Corner statistics:
- Total torrents seeded: 1,197
- Total data uploaded: 23.3TB
|Upcoming Releases and Announcements
Summary of expected upcoming releases
Tools to keep processes in line
Sometimes processes use more resources than they should, interferring with the smooth operation of the rest of the system. When this happens there are several tools a system administrator can use to prevent these runaway processes from having a negative impact. We would like to know which process taming tools our readers use.
You can see the results of our previous poll on running distributions for a long time in last week's edition. All previous poll results can be found in our poll archives.
Tools to keep processes in line
|cpulimit: ||29 (4%)|
| ionice: ||8 (1%)|
| nice/renice: ||110 (14%)|
| ulimit: ||9 (1%)|
| Virtual machine: ||62 (8%)|
| A combination of the above: ||121 (15%)|
| Other: ||53 (7%)|
| None of the above: ||410 (51%)|
DistroWatch database summary
* * * * *
This concludes this week's issue of DistroWatch Weekly. The next instalment will be published on Monday, 21 January 2019. Past articles and reviews can be found through our Article Search page. To contact the authors please send e-mail to:
- Jesse Smith (feedback, questions and suggestions: distribution reviews/submissions, questions and answers, tips and tricks)
- Ladislav Bodnar (feedback, questions, donations, comments)
- Bruce Patterson (podcast)
|Linux Foundation Training
|• Issue 802 (2019-02-18): Slontoo 18.07.1, NetBSD tests newer compiler, Fedora packaging Deepin desktop, changes in Ubuntu Studio|
|• Issue 801 (2019-02-11): Project Trident 18.12, the meaning of status symbols in top, FreeBSD Foundation lists ongoing projects, Plasma Mobile team answers questions|
|• Issue 800 (2019-02-04): FreeNAS 11.2, using Ubuntu Studio software as an add-on, Nitrux developing znx, matching operating systems to file systems|
|• Issue 799 (2019-01-28): KaOS 2018.12, Linux Basics For Hackers, Debian 10 enters freeze, Ubuntu publishes new version for IoT devices|
|• Issue 798 (2019-01-21): Sculpt OS 18.09, picking a location for swap space, Solus team plans ahead, Fedora trying to get a better user count|
|• Issue 797 (2019-01-14): Reborn OS 2018.11.28, TinyPaw-Linux 1.3, dealing with processes which make the desktop unresponsive, Debian testing Secure Boot support|
|• Issue 796 (2019-01-07): FreeBSD 12.0, Peppermint releases ISO update, picking the best distro of 2018, roundtable interview with Debian, Fedora and elementary developers|
|• Issue 795 (2018-12-24): Running a Pinebook, interview with Bedrock founder, Alpine being ported to RISC-V, Librem 5 dev-kits shipped|
|• Issue 794 (2018-12-17): Void 20181111, avoiding software bloat, improvements to HAMMER2, getting application overview in GNOME Shell|
|• Issue 793 (2018-12-10): openSUSE Tumbleweed, finding non-free packages, Debian migrates to usrmerge, Hyperbola gets FSF approval|
|• Issue 792 (2018-1203): GhostBSD 18.10, when to use swap space, DragonFly BSD's wireless support, Fedora planning to pause development schedule|
|• Issue 791 (2018-11-26): Haiku R1 Beta1, default passwords on live media, Slax and Kodachi update their media, dual booting DragonFly BSD on EFI|
|• Issue 790 (2018-11-19): NetBSD 8.0, Bash tips and short-cuts, Fedora's networking benchmarked with FreeBSD, Ubuntu 18.04 to get ten years of support|
|• Issue 789 (2018-11-12): Fedora 29 Workstation and Silverblue, Haiku recovering from server outage, Fedora turns 15, Debian publishes updated media|
|• Issue 788 (2018-11-05): Clu Linux Live 6.0, examining RAM consumpion, finding support for older CPUs, more Steam support for running Windows games on Linux, update from Solus team|
|• Issue 787 (2018-10-29): Lubuntu 18.10, limiting application access to specific users, Haiku hardware compatibility list, IBM purchasing Red Hat|
|• Issue 786 (2018-10-22): elementary OS 5.0, why init keeps running, DragonFly BSD enables virtual machine memory resizing, KDE neon plans to drop older base|
|• Issue 785 (2018-10-15): Reborn OS 2018.09, Nitrux 1.0.15, swapping hard drives between computers, feren OS tries KDE spin, power savings coming to Linux|
|• Issue 784 (2018-10-08): Hamara 2.1, improving manual pages, UBports gets VoIP app, Fedora testing power saving feature|
|• Issue 783 (2018-10-01): Quirky 8.6, setting up dual booting with Ubuntu and FreeBSD, Lubuntu switching to LXQt, Mint works on performance improvements|
|• Issue 782 (2018-09-24): Bodhi Linux 5.0.0, Elive 3.0.0, Solus publishes ISO refresh, UBports invites feedback, Linux Torvalds plans temporary vacation|
|• Issue 781 (2018-09-17): Linux Mint 3 "Debian Edition", file systems for SSDs, MX makes installing Flatpaks easier, Arch team answers questions, Mageia reaches EOL|
|• Issue 780 (2018-09-10): Netrunner 2018.08 Rolling, Fedora improves language support, how to customize Kali Linux, finding the right video drivers|
|• Issue 779 (2018-09-03): Redcore 1806, keeping ISO downloads safe from tampering, Lubuntu makes Calamares more flexible, Ubuntu improves GNOME performance|
|• Issue 778 (2018-08-27): GuixSD 0.15.0, ReactOS 0.4.9, Steam supports Windows games on Linux, Haiku plans for beta, merging disk partitions|
|• Issue 777 (2018-08-20): YunoHost 18.104.22.168, limiting process resource usage, converting file systems on Fedora, Debian turns 25, Lubuntu migrating to Wayland|
|• Issue 776 (2018-08-13): NomadBSD 1.1, Maximum storage limits on Linux, openSUSE extends life for 42.3, updates to the Librem 5 phone interface|
|• Issue 775 (2018-08-06): Secure-K OS 18.5, Linux is about choice, Korora tests community spin, elementary OS hires developer, ReactOS boots on Btrfs|
|• Issue 774 (2018-07-30): Ubuntu MATE & Ubuntu Budgie 18.04, upgrading software from source, Lubuntu shifts focus, NetBSD changes support policy|
|• Issue 773 (2018-07-23): Peppermint OS 9, types of security used by different projects, Mint reacts to bugs in core packages, Slackware turns 25|
|• Issue 772 (2018-07-16): Hyperbola GNU/Linux-libre 0.2.4, UBports running desktop applications, OpenBSD auto-joins wi-fi networks, boot environments and zedenv|
|• Issue 771 (2018-07-09): Linux Lite 4.0, checking CPUs for bugs, configuring GRUB, Mint upgrade instructions, SUSE acquired by EQT|
|• Issue 770 (2018-07-02): Linux Mint 19, Solus polishes desktop experience, MintBox Mini 2, changes to Fedora's installer|
|• Issue 769 (2018-06-25): BunsenLabs Helium, counting Ubuntu users, UBports upgrading to 16.04, Fedora CoreOS, FreeBSD turns 25|
|• Issue 768 (2018-06-18): Devuan 2.0.0, using pkgsrc to manage software, the NOVA filesystem, OpenBSD handles successful cron output|
|• Issue 767 (2018-06-11): Android-x86 7.1-r1, transferring files over OpenSSH with pipes, LFS with Debian package management, Haiku ports LibreOffice|
|• Issue 766 (2018-06-04): openSUSE 15, overview of file system links, Manjaro updates Pamac, ReactOS builds itself, Bodhi closes forums|
|• Issue 765 (2018-05-28): Pop!_OS 18.04, gathering system information, Haiku unifying ARM builds, Solus resumes control of Budgie|
|• Issue 764 (2018-05-21): DragonFly BSD 5.2.0, Tails works on persistent packages, Ubuntu plans new features, finding services affected by an update|
|• Issue 763 (2018-05-14): Fedora 28, Debian compatibility coming to Chrome OS, malware found in some Snaps, Debian's many flavours|
|• Issue 762 (2018-05-07): TrueOS 18.03, live upgrading Raspbian, Mint plans future releases, HardenedBSD to switch back to OpenSSL|
|• Issue 761 (2018-04-30): Ubuntu 18.04, accessing ZFS snapshots, UBports to run on Librem 5 phones, Slackware makes PulseAudio optional|
|• Issue 760 (2018-04-23): Chakra 2017.10, using systemd to hide files, Netrunner's ARM edition, Debian 10 roadmap, Microsoft develops Linux-based OS|
|• Issue 759 (2018-04-16): Neptune 5.0, building containers with Red Hat, antiX introduces Sid edition, fixing filenames on the command line|
|• Issue 758 (2018-04-09): Sortix 1.0, openSUSE's Transactional Updates, Fedora phasing out Python 2, locating portable packages|
|• Issue 757 (2018-04-02): Gatter Linux 0.8, the UNIX and Linux System Administration Handbook, Red Hat turns 25, super long term support kernels|
|• Issue 756 (2018-03-26): NuTyX 10.0, Neptune supplies Debian users with Plasma 5.12, SolydXK on a Raspberry Pi, SysV init development|
|• Issue 755 (2018-03-19): Learning with ArchMerge and Linux Academy, Librem 5 runs Plasma Mobile, Cinnamon gets performance boost|
|• Issue 754 (2018-03-12): Reviewing Sabayon and Antergos, the growing Linux kernel, BSDs getting CPU bug fixes, Manjaro builds for ARM devices|
|• Issue 753 (2018-03-05): Enso OS 0.2, KDE Plasma 5.12 features, MX Linux prepares new features, interview with MidnightBSD's founder|
|• Issue 752 (2018-02-26): OviOS 2.31, performing off-line upgrades, elementary OS's new installer, UBports gets test devices, Redcore team improves security|
|• Issue 751 (2018-02-19): DietPi 6.1, testing KDE's Plasma Mobile, Nitrux packages AppImage in default install, Solus experiments with Wayland|
|• Full list of all issues|
|Random Distribution |
Ares Desktop was a free operating sytem for people looking for a polished desktop environment for the educational, business desktop and home user fields. Ares Desktop was based on the Fedora Core system. Ares Desktop offers more than just an operating system: It comes with many packages that are used daily by desktop educational, business and home users. All these packages are bundled up in an easy installation program.